中国科学院材料磨损与防护重点实验室/先进润滑与防护材料研究发展中心知识库

Effect of 25 keV proton irradiation with fluence of 2.25×10¹⁷ ion/cm² on the structural and tribological properties of polyimide blocks were investigated in a ground-based simulation facility. The changes in surface structure were characterized by FTIR-ATR, laser micro-Raman, contact angle measurement and nanoindentation. The experimental results indicated that the proton irradiation induced bond breaking to form the carbon-enriched structure on polyimide surface, and then increased the surface hardness and the surface energy. The irradiation depth was restricted within 514 nm from the surface by TRIM simulation.
The carbonized layer induced by irradiation was worn out in friction test, which was proved through Raman spectra analysis of the wear track. Proton irradiation increased the initial friction coefficient and decreased the steady friction coefficient of polyimide. In the initial stage, the friction coefficient was closely related to surface hardness of material, and the main wear mechanism was adhesive wear. In the steady stage, the main wear mechanism was three-body abrasion wear, three-body abrasion and the low surface energy could reduce the wear rate and the friction coefficient.