Chinese | English

Scholar Page

Keywords Cloud

Research Outputs

Co-authors[TOP 5]

Usage Statistics


  Total Views
 1404
  Access Source
    internal： 19
    External： 1385
    Domestic： 1169
    Abroad： 235

  Annual Views
 166
  Access Source
    internal： 1
    External： 165
    Domestic： 162
    Abroad： 4

  Monthly Views
 27
  Access Source
    internal： 0
    External： 27
    Domestic： 26
    Abroad： 1

Visits

Visits

1. 氧化锆基纳米复相陶瓷的设计、制备及其力学性能和摩擦学性能研究 [1595]
2. 环保型切削液 [447]
3. Lubrication behavior of Y-TZP/Al2O3/Mo nanocomposites at high temp.. [423]
4. Design and fabrication of laminated-graded zirconia self-lubricati.. [410]
5. Al2O3/Al2O3–ZrO2(3Y)层状纳米陶瓷复合材料的显微结构及弯曲强度 [394]
6. Y–TZP/Al2O3/Mo纳米复合材料的制备及其力学性能 [382]
7. High-performance Self-lubricating Ceramic Composites with Laminate.. [380]
8. Surface Engineering Design of Alumina-Matrix Composites [363]
9. Design and preparation of high-performance alumina functional grad.. [350]
10. Y-TZP/Al2O3 纳米复合陶瓷的压痕尺寸效应 [349]
11. 45#钢表面复合润滑结构的制备及其摩擦性能研究 [324]
12. High-performance ceramic lubricating materials [324]
13. Fabrication of complex-shaped Y-TZP/Al2O3 nanocomposites [322]
14. N，N'-二(对甲基苯胺)-3-氧杂戊二酰胺稀土配合物的超声化学合成 [314]
15. 不同Al2O3含量ZrO2(3Y)/Al2O3纳米复合粉体的制备与表征 [312]
16. 一种氧化铝陶瓷自润滑复合材料及其制备方法 [309]
17. Densification and phase transformation during pressureless sinteri.. [308]
18. 具有仿生结构的自润滑陶瓷复合材料及其制备方法 [302]
19. Al2O3/Al2O3-ZrO2(3Y)层状纳米复合材料的制备与性能优化 [290]
20. 氧化锆纳米陶瓷素坯成型研究 [289]
21. MoSi2增强镍基合金复合材料的摩擦磨损性能研究 [287]
22. Microstructural characterization and crystallization of ZrO2–Y2O3.. [284]
23. Preparation of crystal-controlled Y-TZP/Al2O3 nanocomposites [284]
24. High-temperature self-lubricated properties of Al2O3/Mo laminated .. [276]
25. 用于液态密封剂的复合稠化剂及其制备方法 [270]
26. 纳米复相陶瓷及其摩擦学研究进展 [259]
27. Tribological investigation of MoS2 coatings deposited on the laser.. [246]
28. Influence of structural parameters on the tribological properties .. [241]
29. Tribologicalbehaviorsofself‒matedCu36Zr48Ag8Al8 bulkmetallicglass.. [234]
30. Tribological behavior and lubrication mechanism of self-lubricatin.. [231]
31. Preparation and pressureless sintering of nanostructured zirconia.. [229]
32. Regulation and control of macro-micro structure for optimal perfor.. [226]
33. Novel Approach to the Fabrication of an Alumina-MoS2 Self-Lubricat.. [223]
34. 复合结构氧化铝/氧化铝-氧化锆层状复合材料及制备方法 [211]
35. High-Temperature Self-Lubricated and Fracture Properties of Alumin.. [203]
36. Fabrication and tribological behavior of Al2O3/MoS2–BaSO4 laminat.. [201]
37. 具有仿生结构的Al2O3陶瓷复合材料及制备方法 [195]
38. A novel design to produce high-strength and high-toughness alumina.. [190]
39. Surface engineering design of Al2O3/Mo self-lubricating structural.. [187]
40. Surface composition-lubrication design of Al2O3/Ni laminated compo.. [185]
41. Thermal oxidation behavior and tribological properties of textured.. [183]
42. Dry sliding wear behavior of TC11 alloy at 500 °C: Influence of l.. [182]
43. 一种多层结构氧化铝自润滑复合陶瓷及其制备方法 [178]
44. Influence of structural parameters and transition interface on the.. [176]
45. Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithi.. [174]
46. Enhanced thermal shock response of Al2O3–graphite composites thro.. [173]
47. Design of structure parameters and corrugated interfaces for optim.. [168]
48. 一种多层结构氧化铝复合陶瓷及其制备方法 [168]
49. Friction and wear behavior of Al2O3/rGO fibrous monolithic ceramic.. [168]
50. Surface composition-lubrication design of Al2O3/Mo laminated compo.. [162]
51. Design of interfaces for optimal mechanical properties in Al2O3/Mo.. [159]
52. Surface composition-lubrication design of Al2O3/Ni laminated compo.. [159]
53. Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithi.. [158]
54. Influence of structural parameters and compositions on the tribolo.. [156]
55. Tribological properties of micro-textured surfaces of ZTA ceramic .. [150]
56. Novel Design of Copper–Graphite Self-Lubricating Composites for.. [145]
57. Influence of fiber diameters on fracture and tribological properti.. [128]
58. Surface 3-D lubrication structure design of Al2O3/Ni-laminated cer.. [126]
59. Optimum control of the mechanical properties of alumina/nickel lam.. [116]
60. Fibrous monolithic ceramic with a single alumina phase: Fracture a.. [116]
61. 三维双连续铜/石墨自润滑复合材料的构筑及摩擦磨损性能 [111]
62. Design of “double layer” texture to obtain superhydrophobic and .. [108]
63. Advanced Nanomaterials and Nanostructures for Tribological Applica.. [101]
64. 一种石墨-铜层状复合材料及其制备方法 [99]
65. Mechanical and wear characteristic of Y-TZP/Al2O3 nanocomposites [95]
66. 石墨相形态对铜/石墨复合材料摩擦学性能 和可靠性的影响 [95]
67. Bio-inspired Alumina/Reduced Graphene Oxide Fibrous Monolithic Cer.. [91]
68. Fretting damage behaviors of silicon nitride balls with different .. [91]
69. Influence of binder systems on sintering characteristics, microstr.. [90]
70. 一种超高温水氧环境摩擦磨损测试系统 [88]
71. 一种镁合金表面化学镀方法 [85]
72. 超高温水氧环境摩擦磨损试验系统测控软件 [80]
73. 氮化硅陶瓷球与轴承钢的微动摩擦磨损特性与损伤行为研究 [80]
74. 一种仿生纤维独石结构氮化硼高温润滑材料及其制备方法 [78]
75. 一种高致密氮化硼自润滑复合陶瓷的制备方法 [78]
76. 镁合金复合化学镀表面处理方法 [76]
77. 一种铜基石墨复合密封材料 [76]
78. 一种二维载荷摩擦加载系统 [76]
79. 一种超高温水氧环境模拟系统 [69]
80. Bioinspired PcBN/hBN fibrous monolithic ceramic: High-temperature .. [56]
81. 一种自增韧纤维独石结构陶瓷及其制备方法 [55]
82. 一种采用激光织构化处理不锈钢表面的方法 [53]
83. 一种具有优异力学性能的铜基石墨复合润滑密封材料及其制备方法 [43]
84. 一种高损伤容限氧化铝复合陶瓷及其制备方法 [43]
85. 一种铜基石墨复合润滑密封材料的制备方法 [41]
86. 一种超高温水氧环境摩擦磨损测试系统 [37]
87. 一种滚动球轴承表面损伤摩擦磨损测试系统 [34]
88. 一种用于滚动球轴承摩擦磨损测试的滚动及碰撞摩擦模拟组件 [27]
89. 一种用于滚动球轴承材料摩擦磨损测试的加载系统 [27]
90. 滚动球轴承中轴承球与滚道摩擦磨损测试系统 [24]
91. 一种陶瓷可伐合金组件的制备方法 [10]

Downloads

1. Surface Engineering Design of Alumina-Matrix Composites [127]
2. High-performance Self-lubricating Ceramic Composites with Laminate.. [125]
3. Regulation and control of macro-micro structure for optimal perfor.. [39]
4. High-performance ceramic lubricating materials [34]
5. 一种多层结构氧化铝自润滑复合陶瓷及其制备方法 [12]
6. Al2O3/Al2O3–ZrO2(3Y)层状纳米陶瓷复合材料的显微结构及弯曲强度 [8]
7. Y–TZP/Al2O3/Mo纳米复合材料的制备及其力学性能 [7]
8. Densification and phase transformation during pressureless sinteri.. [6]
9. Tribologicalbehaviorsofself‒matedCu36Zr48Ag8Al8 bulkmetallicglass.. [6]
10. Lubrication behavior of Y-TZP/Al2O3/Mo nanocomposites at high temp.. [5]
11. Tribological investigation of MoS2 coatings deposited on the laser.. [5]
12. 具有仿生结构的自润滑陶瓷复合材料及其制备方法 [5]
13. 一种氧化铝陶瓷自润滑复合材料及其制备方法 [5]
14. Novel Approach to the Fabrication of an Alumina-MoS2 Self-Lubricat.. [5]
15. Fabrication and tribological behavior of Al2O3/MoS2–BaSO4 laminat.. [5]
16. Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithi.. [5]
17. High-temperature self-lubricated properties of Al2O3/Mo laminated .. [4]
18. Design and preparation of high-performance alumina functional grad.. [4]
19. Design of structure parameters and corrugated interfaces for optim.. [4]
20. Influence of structural parameters and transition interface on the.. [4]
21. Novel Design of Copper–Graphite Self-Lubricating Composites for.. [4]
22. 一种镁合金表面化学镀方法 [4]
23. Y-TZP/Al2O3 纳米复合陶瓷的压痕尺寸效应 [3]
24. 用于液态密封剂的复合稠化剂及其制备方法 [3]
25. Design and fabrication of laminated-graded zirconia self-lubricati.. [3]
26. 氧化锆纳米陶瓷素坯成型研究 [3]
27. 环保型切削液 [3]
28. Design of interfaces for optimal mechanical properties in Al2O3/Mo.. [3]
29. Tribological properties of micro-textured surfaces of ZTA ceramic .. [3]
30. High-Temperature Self-Lubricated and Fracture Properties of Alumin.. [3]
31. Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithi.. [3]
32. N，N'-二(对甲基苯胺)-3-氧杂戊二酰胺稀土配合物的超声化学合成 [2]
33. 45#钢表面复合润滑结构的制备及其摩擦性能研究 [2]
34. Preparation of crystal-controlled Y-TZP/Al2O3 nanocomposites [2]
35. Al2O3/Al2O3-ZrO2(3Y)层状纳米复合材料的制备与性能优化 [2]
36. 纳米复相陶瓷及其摩擦学研究进展 [2]
37. 不同Al2O3含量ZrO2(3Y)/Al2O3纳米复合粉体的制备与表征 [2]
38. 复合结构氧化铝/氧化铝-氧化锆层状复合材料及制备方法 [2]
39. Dry sliding wear behavior of TC11 alloy at 500 °C: Influence of l.. [2]
40. Surface composition-lubrication design of Al2O3/Ni laminated compo.. [2]
41. Advanced Nanomaterials and Nanostructures for Tribological Applica.. [2]
42. Thermal oxidation behavior and tribological properties of textured.. [2]
43. Surface engineering design of Al2O3/Mo self-lubricating structural.. [2]
44. A novel design to produce high-strength and high-toughness alumina.. [2]
45. Optimum control of the mechanical properties of alumina/nickel lam.. [2]
46. 一种石墨-铜层状复合材料及其制备方法 [2]
47. 镁合金复合化学镀表面处理方法 [2]
48. Fabrication of complex-shaped Y-TZP/Al2O3 nanocomposites [1]
49. Microstructural characterization and crystallization of ZrO2–Y2O3.. [1]
50. 氧化锆基纳米复相陶瓷的设计、制备及其力学性能和摩擦学性能研究 [1]
51. MoSi2增强镍基合金复合材料的摩擦磨损性能研究 [1]
52. Influence of structural parameters on the tribological properties .. [1]
53. Surface composition-lubrication design of Al2O3/Mo laminated compo.. [1]
54. Influence of structural parameters and compositions on the tribolo.. [1]
55. Tribological behavior and lubrication mechanism of self-lubricatin.. [1]
56. 一种多层结构氧化铝复合陶瓷及其制备方法 [1]
57. Fibrous monolithic ceramic with a single alumina phase: Fracture a.. [1]
58. Surface 3-D lubrication structure design of Al2O3/Ni-laminated cer.. [1]
59. 一种具有优异力学性能的铜基石墨复合润滑密封材料及其制备方法 [1]
60. 一种铜基石墨复合润滑密封材料的制备方法 [1]
61. 一种高损伤容限氧化铝复合陶瓷及其制备方法 [1]
62. 一种滚动球轴承表面损伤摩擦磨损测试系统 [1]
63. 一种用于滚动球轴承摩擦磨损测试的滚动及碰撞摩擦模拟组件 [1]