Polymeric ionic liquid modified stainless steel wire as a novel fiber for solid-phase microextraction | |
Department | 中科院西北特色植物资源化学重点实验室/甘肃省天然药物重点实验室 |
Xu LL(许丽丽)1,2; Jia J(贾静)1,2; Feng JJ(冯娟娟)1,2; Liu SJ(刘淑娟)1; Jiang SX(蒋生祥)1; Jiang SX(蒋生祥) | |
2013 | |
Source Publication | Journal of Separation Science |
ISSN | 1615-9306 |
Volume | 36Issue:2Pages:369-375 |
Abstract | A polymeric ionic liquid modified stainless steel wire for solid-phase microextraction was reported. Mercaptopropyl-functionalized stainless steel wire that was formed by co-condensation of tetramethoxysilane and 3-mercaptopropyltrimethoxysilane via a sol-gel process, which is followed by in situ surface radical chain-transfer polymerization of 1-vinyl-3-octylimidazolium hexafluorophosphate to result in polymeric ionic liquid modified stainless steel wire. The fiber surface was characterized by field emission scanning electron microscope equipped with energy dispersive X-ray analysis. Coupled with GC, extraction performance of the fiber was tested with phenols and polycyclic aromatic hydrocarbons as model analytes. Effects of extraction and desorption conditions were investigated systematically in our work. RSDs for single-fiber repeatability and fiber-to-fiber reproducibility were less than 7.34 and 16.82%, respectively. The calibration curves were linear in a wide range for all analytes and the detection limits were in the range of 10-60 ng L-1. Two real water samples from the Yellow River and local waterworks were applied to test the as-established solid-phase microextraction-GC method with the recoveries of samples spiked at 10 μg L-1 ranged from 83.35 to 119.24%. The fiber not only exhibited excellent extraction efficiency, but also very good rigidity, stability and durability. |
Keyword | Polymeric Ionic Liquid Magnetron Sputtering Solid-phase Microextraction Phenols Polycyclic Aromatic Hydrocarbons |
Subject Area | 分析化学与药物化学 |
DOI | 10.1002/jssc.201200644 |
Funding Organization | the National Natural Science Foundation of China (No. 20975105;No.21175143);the National Science & Technology Major Project of China (No. 2011ZX05010;No. 2011ZX05011) |
Indexed By | SCI |
If | 2.594 |
Language | 英语 |
Funding Project | 药物分离材料研究组 |
compositor | 第一作者单位 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.licp.cn/handle/362003/4613 |
Collection | 中科院西北特色植物资源化学重点实验室/甘肃省天然药物重点实验室 |
Corresponding Author | Jiang SX(蒋生祥) |
Affiliation | 1.Chinese Acad Sci, Key Lab Nat Med Gansu Prov, Lanzhou Inst Chem Phys, Lanzhou 730000, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing, Peoples R China |
Recommended Citation GB/T 7714 | Xu LL,Jia J,Feng JJ,et al. Polymeric ionic liquid modified stainless steel wire as a novel fiber for solid-phase microextraction[J]. Journal of Separation Science,2013,36(2):369-375. |
APA | Xu LL,Jia J,Feng JJ,Liu SJ,Jiang SX,&蒋生祥.(2013).Polymeric ionic liquid modified stainless steel wire as a novel fiber for solid-phase microextraction.Journal of Separation Science,36(2),369-375. |
MLA | Xu LL,et al."Polymeric ionic liquid modified stainless steel wire as a novel fiber for solid-phase microextraction".Journal of Separation Science 36.2(2013):369-375. |
Files in This Item: | ||||||
File Name/Size | DocType | Version | Access | License | ||
jssc3056.pdf(797KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Application Full Text |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment