Influence of phase composition on fretting wear behavior of thermally sprayed aluminum bronze coatings | |
Department | 先进润滑与防护材料研究发展中心 |
Yang J(杨杰)1,2; An YL(安宇龙)1; Zhao XQ(赵晓琴)1; Chen J(陈杰)1,2; Liu N(刘宁)1,2; Hou GL(侯国梁)1,2; Zhou HD(周惠娣)1; Chen JM(陈建敏)1; Zhou HD(周惠娣) | |
The second department | 固体润滑国家重点实验室 |
2013 | |
Source Publication | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
ISSN | 1350-6501 |
Volume | 227Issue:9Pages:1030-1037 |
Abstract | Single -phase and duplex (+) phase aluminum bronze (CuAl) coatings were deposited on 1Cr18Ni9Ti stainless steels by atmosphere plasma spray. The fretting wear behaviors of the two types of coatings were investigated in relation to their phase composition. The damage mechanisms of the coatings were identified by analysing their worn surfaces using scanning electron microscopy and three-dimensional non-contact surface profiler. A discussion about the identified fretting damage mechanisms was carried out. Results show that duplex CuAl coating has higher hardness than the single -phase CuAl coating but the former has poorer resistance against fretting wear than the latter in mixed stick-slip regime and gross slip regime. The toughness reduction due to the dendritic distribution of the phase in duplex CuAl coating could explain the low fretting wear resistance observed in the duplex coating. In stick regime, single -phase CuAl coating has a lower friction coefficient but it has a higher wear rate than the duplex coating, which is attributed to the lower hardness and hence more severe plastic deformation. |
Keyword | Atmosphere Plasma Spray Aluminum Bronze Phase Composition Fretting Wear |
Subject Area | 材料科学与物理化学 |
DOI | 10.1177/1350650113479073 |
Indexed By | SCI |
If | 0.660 |
Language | 英语 |
Funding Project | 磨损与表面工程课题组 |
compositor | 第一作者单位 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.licp.cn/handle/362003/4561 |
Collection | 中国科学院材料磨损与防护重点实验室/先进润滑与防护材料研究发展中心 固体润滑国家重点实验室(LSL) |
Corresponding Author | Zhou HD(周惠娣) |
Affiliation | 1.Chinese Acad Sci, State Key Lab Solid Lubricat, Lanzhou Inst Chem Phys, Lanzhou 730000, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing, Peoples R China |
Recommended Citation GB/T 7714 | Yang J,An YL,Zhao XQ,et al. Influence of phase composition on fretting wear behavior of thermally sprayed aluminum bronze coatings[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,2013,227(9):1030-1037. |
APA | Yang J.,An YL.,Zhao XQ.,Chen J.,Liu N.,...&周惠娣.(2013).Influence of phase composition on fretting wear behavior of thermally sprayed aluminum bronze coatings.Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,227(9),1030-1037. |
MLA | Yang J,et al."Influence of phase composition on fretting wear behavior of thermally sprayed aluminum bronze coatings".Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227.9(2013):1030-1037. |
Files in This Item: | ||||||
File Name/Size | DocType | Version | Access | License | ||
Influence of phase c(521KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Application Full Text |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment