| The Tribological Behaviour of Fe-28Al-5Cr/TiC Under Liquid Paraffine Lubrication | |
| Department | 固体润滑国家重点实验室 |
Zhang XH(张兴华)1,2 ; Yang J(杨军)1; Ma JQ(马吉强)1; Hao JY(郝俊英)1; Bi QL(毕秦岭)1; Liang YM(梁永民)1; Liu WM(刘维民)1; Yang J(杨军)
| |
| 2012 | |
| Source Publication | Tribology Letters
 |
| ISSN | 1023-8883 |
| Volume | 45Issue:1Pages:109-116 |
| Abstract | The tribological behaviour of Fe-28Al-5Cr and its composites containing 15, 25 and 50 wt% TiC (corresponding to 19.3, 31.2 and 57.6 vol%), produced by hot-pressing process, was investigated under liquid paraffine lubrication against an AISI 52100 steel ball in ambient environment at varied applied loads and sliding speeds. It was found that the wear resistance increased and friction coefficient decreased with increasing of TiC content. The coefficients of friction are in the range of 0.09-0.14 at the given testing conditions. The wear rates of all the materials except the 50% composite are on the order of 10-6-10-5 mm3 m-1, the wear rate for the 50% composite is too low to quantify under the two sliding conditions, (50 N, 0.04 m/s) and (100 N, 0.02 m/s). The wear rates of all the materials increase as applied load increases and the increasing extent diminishes with the increase of TiC content, but first increase slightly and then nearly remains steadiness with increasing sliding speed. The 50 wt% composite has wear resistance about 7-20 times better than pure Fe-28Al-5Cr at different sliding parameters. The enhanced wear resistance by TiC addition is attributed to the high hardness of the composites, as well as support of the oil lubrication film/layer by the hard TiC phase. The worn surfaces of all the materials are analyzed by a scanning electron microscope. The dominant wear mechanism of the Fe-28Al-5Cr and 15% composite is grooving and flaking-off, but those of the 25 and 50% composites are mainly shallow grooving. |
| Keyword | Fe(3)Al Intermetallics Fe(3)Al-tic Composites Oil Lubrication Wear Mechanism |
| Subject Area | 材料科学与物理化学 |
| DOI | 10.1007/s11249-011-9853-z |
| Funding Organization | the National Natural Science Foundation of China (50801064;50905177);the National 973 Project of China (2007CB607601) |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | 高温抗磨材料组;空间润滑材料组 |
| compositor | 第一作者单位 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.licp.cn/handle/362003/3507 |
| Collection | 固体润滑国家重点实验室（LSL） |
| Corresponding Author | Yang J(杨军) |
| Affiliation | 1.Chinese Acad Sci, State Key Lab Solid Lubricat, Lanzhou Inst Chem Phys, Lanzhou 730000, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing 100039, Peoples R China |
| Recommended Citation GB/T 7714 | Zhang XH,Yang J,Ma JQ,et al. The Tribological Behaviour of Fe-28Al-5Cr/TiC Under Liquid Paraffine Lubrication[J]. Tribology Letters,2012,45(1):109-116. |
| APA | Zhang XH.,Yang J.,Ma JQ.,Hao JY.,Bi QL.,...&杨军.(2012).The Tribological Behaviour of Fe-28Al-5Cr/TiC Under Liquid Paraffine Lubrication.Tribology Letters,45(1),109-116. |
| MLA | Zhang XH,et al."The Tribological Behaviour of Fe-28Al-5Cr/TiC Under Liquid Paraffine Lubrication".Tribology Letters 45.1(2012):109-116. |
| Files in This Item: | ||||||
| File Name/Size | DocType | Version | Access | License | ||
| 109-116.PDF（1193KB） | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Application Full Text | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment