中国科学院材料磨损与防护重点实验室/先进润滑与防护材料研究发展中心知识库

Co and Co-P coatings were prepared on copper using an aluminum-induced direct electroless plating method, the
main feature of which was that a small part of the copper substrate was twined around by the aluminum foil
during the plating process. Because of coupling the copper substrates with aluminum foils, Co coatings were
obtained on copper from a reducing agent-free plating solution and Co-P coatings were obtained without activation step at room temperature. The electrochemical experiments demonstrated the coupled aluminum foils
could shift the potential of copper substrates negatively, and also donate electrons for the reduction of cobalt
ions in the alkaline plating solutions. The morphology and composition of the Co and Co-P coatings were
characterized by scanning electron microscope, energy dispersive X-ray spectroscopy and X-ray photoelectron
spectroscopy. Compared with Co coatings, the Co-P coatings had larger deposition rates and were consisted of
finer grains. Co and Co-P coatings showed nearly the same oxygen-evolution reaction electrocatalytic performance in 1.0 M KOH solution, which was superior to that of platinum plate. While, the Co-P coatings exhibited
better electrocatalytic performance for hydrogen-evolution reaction in 1.0 M KOH solution than the Co coating,
and could reach a current density of 40 mA·cm−2 at overpotential of about 240 mV.