Improvement of the oxidation and wear resistance of pure Ti by Laser-cladding Ti3Al coating at elevated temperature | |
Department | 固体润滑国家重点实验室 ; 先进润滑与防护材料研究发展中心 |
Guo C(郭纯); Zhou JS(周健松); Zhao JR(赵杰荣); Wang LQ(王凌倩); Yu YJ(俞友军); Chen JM(陈建敏); Zhou HD(周惠娣) | |
2011 | |
Source Publication | Tribol Lett |
ISSN | 1023-8883 |
Volume | 42Pages:151-159 |
Abstract | Ti3Al coating was in situ synthesized success- fully on pure Ti substrate by laser-cladding technology using aluminum powder as the precursor. The composition and microstructure of the prepared coating were analyzed by transmission electron microscopy, scanning electron microscopy (SEM), and X-ray diffraction technique. Thermal gravimetric analysis was used to evaluate the high-temperature oxidation resistance of the Ti3Al coating. The friction and wear behavior was tested through sliding against Si3N4 ball at elevated temperature of 20, 100, 300, and 500 C. The morphologies of the worn surfaces and wear debris were also analyzed by SEM and three- dimensional non-contact surface mapping. The results show that the Ti3Al coating with high microhardness, high- temperature oxidation resistance, and high temperature wear resistance. The pure Ti substrate is dominated by severe adhesion wear, abrasive wear, fracture, and severe plastic deformation at lower temperature, and severe adhesion wear, abrasive wear, plastic deformation, oxida- tion, and nitriding wear at higher temperature, whereas the Ti3Al coating experiences only moderate abrasive and adhesive wear when sliding against the Si3N4 ceramic ball counterpart. In addition, the wear debris of the laser-clad- ding Ti3Al coating sliding and Si3N4 friction pairs are much smaller than that of pure Ti substrate and Si3N4 friction pairs at elevated temperature. |
Keyword | Titanium Oxidative Wear Fretting Coatings Wear Resistance |
Subject Area | 材料科学与物理化学 |
Funding Organization | the Ministry of Science and Technology of China (Project of 863 plan;Grant NO.2006AA03A219);National Natural Science Foundation of China (Grant NO.51045004) |
Indexed By | SCI |
Language | 英语 |
Funding Project | 磨损和表面工程组 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.licp.cn/handle/362003/2334 |
Collection | 固体润滑国家重点实验室(LSL) 中国科学院材料磨损与防护重点实验室/先进润滑与防护材料研究发展中心 |
Corresponding Author | Zhou JS(周健松) |
Recommended Citation GB/T 7714 | Guo C,Zhou JS,Zhao JR,et al. Improvement of the oxidation and wear resistance of pure Ti by Laser-cladding Ti3Al coating at elevated temperature[J]. Tribol Lett,2011,42:151-159. |
APA | 郭纯.,周健松.,赵杰荣.,王凌倩.,俞友军.,...&周惠娣.(2011).Improvement of the oxidation and wear resistance of pure Ti by Laser-cladding Ti3Al coating at elevated temperature.Tribol Lett,42,151-159. |
MLA | 郭纯,et al."Improvement of the oxidation and wear resistance of pure Ti by Laser-cladding Ti3Al coating at elevated temperature".Tribol Lett 42(2011):151-159. |
Files in This Item: | ||||||
File Name/Size | DocType | Version | Access | License | ||
2011151-159.PDF(1002KB) | 开放获取 | License | View Application Full Text |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment