固体润滑国家重点实验室（LSL）知识库

A new structured triboelectric nanogenerators (TENG) was designed by adding a transition layer between the friction layer and the conduct layer, which could significantly improve the output performance by one order of magnitude. The material of transition layer, such as polyimide, has high ability to store the triboelectrification charges, resulting in more induced charges and higher external current. After adding a polyimide charge storage layer with the thickness of 25 μm, the short-circuit current and output voltage of polyvinylidene fluoride (PVDF) and nylon (NY) based TENG (Cu-PI-PVDF@NY-Cu) increased from 9.2 μA to 65 μA, and 110 V to 1010 V, respectively. The maximum charge density can reach approximately 105 μC/m² with the maximum value of the output power of 5.87 mW under 4 MΩ loading resistance, which can instantaneous light up 992 commercial LEDs and charge a capacitor with the speed increased by 10 times. Moreover, the mechanism and influence factors including the surface structure, composition and thickness of the charge keeping layer to enhance the output of TENGs were discussed in detail. The charge decay tests of the transition layers showed that polyimide layer has very good charge keeping ability with a decay rate of only about 20% in 4 h, while the charge of PVDF decrease about 97% in 4 h, which is a key factor for its lower output.