LICP OpenIR  > 固体润滑国家重点实验室(LSL)
A study of 2,5-dimercapto-1,3,4-thiadiazole derivatives as multifunctional additives in water-based hydraulic fluid
Department固体润滑国家重点实验室
Wang JM(王俊明)1,2; Wang, Jianhua3; Li, Chunsheng3; Zhao GQ(赵改青)1; Wang XB(王晓波)1; Wang XB(王晓波)
2014
Source PublicationIndustrial Lubrication and Tribology
ISSN0036-8792
Volume66Issue:3Pages:402-410
AbstractPurpose – The purpose of this paper is to present the tribological, anticorrosion and antirust properties of three 2,5-dimercapto-1,3,4-thiadiazole (DMTD) derivatives as water-soluble additives in water–glycol hydraulic fluid.
Design/methodology/approach – DMTD derivatives possessing excellent corrosion inhibiting and extreme-pressure (EP) properties have long been used as metal passivators and load-carrying additives in lubricating oils and grease. However, there are seldom literatures about DMTD derivatives as water-soluble lubricant additives as yet. In this work, three DMTD derivatives were synthesized and investigated as water-soluble additives in the water–glycol hydraulic fluid. Their tribological properties were evaluated in detail by four-ball wear test machine and Optimol SRV-IV oscillating friction and wear tester. Meanwhile, their anticorrosion and antirust properties were also investigated by copper strip corrosive tests and antirust tests, respectively. The worn surfaces were analyzed by scanning electron microscope and X-ray photonelectron spectroscope, and the EP, antiwear and friction-reducing mechanisms were primarily proposed.
Findings – The synthesized three DMTD derivatives (coded as A, B and C) have excellent solubility in the base liquid of the water–glycol hydraulic fluid. The experimental results demonstrated that all these compounds, especially A, could remarkably improve the EP, antiwear and friction-reducing properties of the base liquid. Furthermore, they all have perfect copper corrosion inhibiting and antirust properties with low adding concentration (< 3 weight per cent) in the base liquid and hence could be used as multifunctional additives in the water–glycol hydraulic fluid.
Research limitations/implications – This research only focused on the synthesized DMTD derivatives. If possible, some other thiadiazole derivatives also should be investigated.
Practical implications – The synthesized DMTD derivatives, especially compound A, can be used as multifunctional water-soluble additives in the water–glycol hydraulic fluid.
Originality/value – In this paper, three DMTD derivatives were synthesized and their tribological behaviors as water-soluble lubricant additives were investigated for the first time. In addition, the EP, antiwear and friction-reducing mechanisms were also put forward.
KeywordWater-soluble Additive 2 Tribological Properties 5-dimercapto-1 Water-glycol Hydraulic Fluid 3 4-thiadiazole
Subject Area材料科学与物理化学
DOI10.1108/ilt-11-2011-0094
Funding Organizationthe Major State Basic Research Development Program of China (973 Program) (Grant No. 2007CB607606)
Indexed BySCI
If0.444
Language英语
Funding Project工业润滑研究组
compositor第一作者单位
Citation statistics
Cited Times:20[WOS]   [WOS Record]     [Related Records in WOS]
Document Type期刊论文
Identifierhttp://ir.licp.cn/handle/362003/19273
Collection固体润滑国家重点实验室(LSL)
Corresponding AuthorWang XB(王晓波)
Affiliation1.Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China
2.Chinese Acad Sci, Grad Sch, Beijing, Peoples R China
3.Navy Logist Tech Equipment Res Inst, Beijing, Peoples R China
Recommended Citation
GB/T 7714
Wang JM,Wang, Jianhua,Li, Chunsheng,et al. A study of 2,5-dimercapto-1,3,4-thiadiazole derivatives as multifunctional additives in water-based hydraulic fluid[J]. Industrial Lubrication and Tribology,2014,66(3):402-410.
APA Wang JM,Wang, Jianhua,Li, Chunsheng,Zhao GQ,Wang XB,&王晓波.(2014).A study of 2,5-dimercapto-1,3,4-thiadiazole derivatives as multifunctional additives in water-based hydraulic fluid.Industrial Lubrication and Tribology,66(3),402-410.
MLA Wang JM,et al."A study of 2,5-dimercapto-1,3,4-thiadiazole derivatives as multifunctional additives in water-based hydraulic fluid".Industrial Lubrication and Tribology 66.3(2014):402-410.
Files in This Item:
File Name/Size DocType Version Access License
LZ01028442.pdf(7312KB)期刊论文作者接受稿开放获取CC BY-NC-SAView Application Full Text
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Wang JM(王俊明)]'s Articles
[Wang, Jianhua]'s Articles
[Li, Chunsheng]'s Articles
Baidu academic
Similar articles in Baidu academic
[Wang JM(王俊明)]'s Articles
[Wang, Jianhua]'s Articles
[Li, Chunsheng]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Wang JM(王俊明)]'s Articles
[Wang, Jianhua]'s Articles
[Li, Chunsheng]'s Articles
Terms of Use
No data!
Social Bookmark/Share
File name: LZ01028442.pdf
Format: Adobe PDF
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.